You can apply RV Roof Magic at any temperature above freezing, but we suggest applying on a day that is at least 50 degrees

rv roof sealant

Why is Liquid RV Roof Magic the Best Choice?

With our over 25-year history of success, join the thousands who have already benefited from a system specifically formulated for the RV, Trailer and Mobile Home industries. Never a primer needed and backed by a 10-year manufacturer’s warranty. We have invested a significant amount of time in money years ago in developing our proprietary solvent. This specially formulated drying process allows for a chemical cross-link to occur; whereby our RvRoofMagic and the surface it is applied on becomes one in the same. the hallmark to the products success!. Apply today and drive away tomorrow. Over the years, we have received valuable feedback from RV owners, repair shops and retail outlets and then formulated RvRoofMagic to address the need and demand for a quality roofing sealant within the RV community. We continue to listen to our customers and value their input in making our product the best on the market!

Add another 15-18 years to your roof's life before a needing a recoat. A primer is never needed! When you compare other products that require primers and multiple coats, you far exceed the cost of RvRoofMagic. Rvroofmagic because of its chemical makeup will NOT cause streaking down the side of your RV like many coatings on the market. Why add unnecessary weight and extra time by using products requiring multiple coats? Cut your time and labor costs in half. RV-Roof-Magic is a professional grade solvent-based product with an incredibly fast set up time. Apply RvRoofmagic today and drive away tomorrow!

rv roof sealant

Specifically formulated for:

  • Recreational vehicles
  • Trailers
  • Mobile homes
  • Buses
  • Shipping containers
  • House boats

The Best RV Roof Sealant for RV Roof Repair

RV-ROOF-MAGIC is the only RV sealant that can go over all of the following surfaces, never needs a primer and is backed by a 10-year warranty!

  1. EPDM
  2. Can be applied directly over any non-silicone product such as Dicor, Kool Seal and elastomeric.
  3. Alpha rubber roof made by Fleetwood RV's.
  4. Fiberglass
  5. Butyl rubber
  6. Hypalon rubber
  7. Metal
  8. NOTE: Cannot be applied over silicone coatings.
  9. Vinyl-adhesion test is required.
  10. TPO
    1. TPO must be cleaned specifically with Roof Protect found on our site
    2. TPO must have remaining service life. TPO scrim must not be visible throughout the field of the roof.
    3. Surface must be dry. Any of these could cause the material to blister/wrinkle
rv roof sealant
rv roofing solutions
rv roofing solutions
rv roofing solutions

rv roof sealer rv roof sealer

About RV Roof Magic

When looking for a long-term roof solution, RV Roof Magic provides outstanding characteristics not found in other coatings.

Product Features

  • Waterproof in two hours
  • Pot Life and Shelf life, three years with lid properly sealed
  • Can be applied on vertical surfaces.
  • Salt-water resistance for those living along a coast.
  • UV resistant
  • 50 Square feet per gallon
  • Tensile Strength 1200 PSI!!!
  • Prevents UV-degradation and premature roof failure.
  • Dries in one day, meaning apply today and drive your RV the next day! No waiting
  • One-component product
  • No primer required.
  • Thinning is not required.
  • Contains built-in fungicides and mildewcides.
  • Provides a seamless membrane. Never worry about seams again.
  • Highly reflective to reduce surface temperature and RV cooling costs.
  • Will withstand ponding water 365 days a year.

Brand Partners

best rv roof sealant
best rv roof sealant
camper roof sealant,
camper roof sealant,
rv rubber roof


For EPDM roofs, apply a "flash coat" (a very light coat) approx. 200 sq. ft 1.5 gallon resulting in 6-8 Mil. Then, once the product dries, the final coat at 50 sq. ft per gallon, resulting in 20 wet mil.
You can chalk off your roof into sections, six feet long since the unit is a standard eight ft wide. Each of those chalked-off areas will require a gallon. The flash coat will not require any additional product to be ordered.
Assuming your daytime temperatures are above 50 degrees, the product will dry in 3-4 hours.
The lower the temperature the longer it will take to dry.
That is one of the many great benefits of the product. You apply today and drive off tomorrow!
A gallon will cover 50 square feet
The easiest way is to chalk off your roof into a 10 X 5, 50 square feet. Once you are done filling in one of these sections you should be done with a gallon of the material.
One gallon and four gallon pails. Each gallon will cover 50 sq. ft.
The Rubex caulk was field tested to be compatible with RvRoofMagic and is used around the perimeters of the roof where loose caulk needs to be removed. It is also used around the vents and AC’s. Each tube covers approximately 15 linear feet.
Assuming temperatures are above 50 degrees, within four hours.
No this is a single component moisture cure product.
A long nap roller. For the verticals and around vents and AC’s, a brush.
No. As it is a solvent based product, that is one of the benefits. So, you are saving money and time with a one-component product.
Fortunately, RvRoofMagic takes the guess-work out of needing to worry about that. RvRoofMagic can go directly over the following:
  • EPDM
  • PVC
  • Fiberglass
  • Butyl Rubber
  • Alpha Rubber roofs
  • Roofs that were coated with a 3rd party coating like an acrylic
NOTE: RvRoofMagic will not adhere to a silicone surface
We suggest washing the roof with a mild detergent such as Dawn or Simple Green. Also for existing rubber roof you will want to use our Roof Protect to wash your roof prior to the application. Otherwise over time you roof may turn black in those areas. Be sure the surface is perfectly dry before applying.


rv rubber roof sealant

Contact US

To speak to a sales representative please call us at 855-281-0907