So, we just ordered another 5 gallons to do our uncles unit. But here are some pictures we took before and now three years later. It looks just like the day we applied it. Not sure what is your super-duper solvent, but this is the best rv coating I have ever seen, and I have had many discussions about your product and others in the campgrounds over the last two years. Anyway, we will be doing a video and will send once it is done.
Colorado Springs CO
A few pictures of a couple women after completing the rv roof with Epdm roof coating. We started at 8:30 in the morning with the roof protect cleaner and next day same time and finished at 3:30. Turned out really well. Sorry I don’t have any before pictures, but we are extremely happy the way it turned out. 28 ft. Keystone Cougar with one slide out. We did the top of the slide also.
Received your products last Saturday. I cleaned with your product and performed exceedingly well. Put down the flash coat after. (that was the hardest of any of it, brushed on.) Sunday did the coating with 3/8th inch nap roller. Absolutely the whole process was seamless!!! Loved the fact that it did not require a primer and only needed one coat. Have to tell you, when we were looking on the internet your product looked to be the best and now after we applied it we are confident we made the right decision. You guy actually picked up the phone WOW a company that answers their phones. Thanks to Lenny for his help. I can't wait to see how it holds up this winter,with the cold,snow,& ice.. Will let you know thanks again!
I recently finished recoating the EPDM roof on our 2000 Alpenlite 5th wheel, using RVRoofMagic and the Repair Kit for sealing around all the edges, vents and fasteners. I removed three solar panels, three vent covers and the AC cover before washing the entire roof with the cleaner/degreaser from Roof Magic. I then masked around the entire perimeter of the trailer and hung plastic sheeting to prevent any splatters of the roof coating from getting on the windows or siding of the trailer. Next, I cut in around all the openings and the edges before applying the thin flash coat. I repeated this procedure two more times for the two final coats to achieve the desired film thickness of 20 mil. The Trailer roof is 8’ x 28’ = 224 sq. ft. minus 35 sq. ft. for the vents, skylight, AC and Satellite Dish, so my total area to cover was 189 sq. ft. I used approximately 4 gallons of RV Roof Magic for a coverage of 50 sq. ft. per gallon. I used a 3/8” nap roller and applied it as thick as possible on the second and third coats.
Best and Happy RVing
I am ecstatic with the results and the self-leveling qualities of the product. We have used other products but none that went on like this. Your customer support people discussed the cross-linking abilities of this product, so I have to say that you guys have something here! Your videos on the site were a big help for us in making our decision. It was a fairly straight forward process.
Thank you, Bob for sending in your before and after pictures of your application!
I contacted you guys after 2 days and was still tacky, & was told it could take a couple more days depending on humidity so I waited 3 days, and I was dry to the touch. Average temperature was 75-85 degrees during the days, and low to mid 60’s at night. Low humidity, & nice breezy conditions. Rained one time, for about 2 hours. On day 4 I applied 2nd layer, slightly thicker layer, and it went on perfect. Temp 80 degrees and sunny.
Thank you to Raoul for sending in his before and after pictures of his completed project.
Hello everyone well here are some before and after pics. It really turned out great. Thank you to your support staff it did need two coats. After the first coat dried you could still see some of the wood grains but after the 2nd coat it looks like someone put one piece of rubber over it. Very smooth and it saved me a few hundred dollars vs the alternative.
Folks here are the pictures as promised. What a great product all around. Very satisfied with the application ( I did put down a flash coat because I was not sure if it was EPDM or not) better safe than sorry!
I washed the unit down and let it dry overnight and then for about 4 hours the next morning just to let any dew burn off. I ordered 7 gallons which was enough for the project. The 3/8 inch roller worked out well and a 1/5 inch paintbrush for around the AC’s vents and trim work. The after pictures are the next morning about 11:30 really like the way the product self-leveled as I was rolling it out. Have to tell you my roof never looked so good. I purchased this because someone at the rv park use it last year and I got up on his roof one year later and he said he never had anymore leaks. I will be telling folks about the product and your terrific customer service. I know it is touch with Covid but every time I called in (which was a few times) either you guys answered the phone or called me back within an hour or so.
Hello, I just wanted to let you know your roof magic product is great stuff ! These are pictures when it was applied on my camper roof this past spring. But I also wanted to follow up with your company and let you know after a year it is still fantastic and lives up to all the hype you said it would. I recommend this product to anyone thinking about a roof coating. I have included some photos from start to finish of my camper.
SureBuilt Homes & Restoration